Circuit Breaker Manufacturer
English
The Modular Signal Lamp is applicable to circuit with rated voltage 230V~and frequency 50/60Hz
for visual indication and signaling.It confirms with the standard of IEC 60947-5-1
|
ITEM |
DATA |
|
Rated voltage |
230V AC |
|
Rated frequency |
50/60Hz |
|
Colour |
Red/Green/Yellow/Blue/White |
|
Connection terminal |
Pillar terminal with clamp |
|
Connection capacity |
Rigid conductor 16mm2 |
|
Installation |
On din rail 35mm |
|
Max power |
0.06W |
|
Illumination |
LED |
|
Service duration |
30000 HOURS |
|
Ambient temperature |
-5°C~+40°C |
|
Altitude |
≤2,000m |
●While installation, check if the rated voltage of the signal lamp meets operating requirements.
●While installation, the wire should be tightened and prevent from loosing or falling off, and the copper wire
can't be bare and stretch out of the terminal.
●The indication lamp should be protected against rain and water during working.
Both MCB and MCCB are electrical line protection devices, but they also have some differences.The difference between a molded case circuit breaker and a miniature circuit breaker is that the electrica
[Circuit breaker knowledge] RCCB manufacturer will introduce the difference between the residual current circuit breaker and the residual current operated circuit breaker.
Español
