Magnetic Relay Release
Magnetic Relay Release

Magnetic Relay Release

The magnetic relay Release is designed according to the principle of a holding magnet relay for use in residual current circuit breakers. The tripping system consists of plunger, pole and armature.

At delivery, the permanent magnet in the magnetic relay is fully magnetized and the armature is in the closed position , that is to say in contact with the pole.

The tripping power, respectively the tripping current, is set by demagnetizing the integrated permanent magnet after installation.

Get Quote
Basic Specification and Main Parameters
NO PARAMETER NAMES UNIT PARAMETER
≤40A(RCCB) ≤40A(RCCB)
1 Action Current mA 10/30/100/300/500 10/30/100/300/500
2 Tripping Current mA 7.0 to 8.0 3.0 to 4.0
3 Tripping Voltage mV 12.5 12.5
4 Rated Tripping Power micro VA 50 50
5 Operated Tripping Power micro VA 40 40
6 Resistance Ohms 2.5--4.6 18--30
7 Ohmic Resistance Ohms 1.0±30% 8.0±30%
8 Thrust force mm 0.2mm 0.2mm
9 N >0.45N >0.45N
10 mm 1.6mm 1.6mm
N >0.25N >0.25N
11 Pushrod Stroke mm 1.8 1.8
Restoring Force Centi New ton 100 to 130 100 to 130
Recommended Restoring speed m/Sec. 0.5--0.8 0.5--0.8
Operating Time (at F=50 Hz,1.2*S na) m/Sec. 20 20
12 Ambient Temperature Centigrade -25℃ to 80℃ -25℃ to 80℃
13 Mechanical Life Cyc les >5000 AS per >5000 AS per
14 Testing System   IEC61008/EN,Combination of RCCB test requirem ents IEC61008/EN,Combination of RCCB test requirem ents
15
16 Length of wire mm 90+5 90+5

 

 

Product View

Related Products

News information

what is the difference between mcb and mccb

Both MCB and MCCB are electrical line protection devices, but they also have some differences.The difference between a molded case circuit breaker and a miniature circuit breaker is that the electrica

What is the difference between RCCB and leakage protector?

[Circuit breaker knowledge] RCCB manufacturer will introduce the difference between the residual current circuit breaker and the residual current operated circuit breaker.

Get in Touch

Captcha Code
×